TL40: Đèn tháp tín hiệu kích thước 40mm/ TL40 Signal Tower Light Dimension 40 mm.
TL40: Đèn tháp tín hiệu kích thước 40mm/ TL40 Signal Tower Light Dimension 40 mm.
DESCRIPTION
• Machine operating status display device
• Compact size 40 mm, available in both AC and DC
• Can display up to 5 layers. 5 colors Red, Yellow, Green, Blue, White.
• LED display for long life.
• There are both continuous and flashing in the same.
• Buzzer alert at 90 dB max (at 1 M)
• Push / Pull Connection is available for both NPN / PNP, Open Collector
• RS485 MODBUS RTU PROTOCOL Communication (TL-20M and TL-2BM only)
• Anti-rust material protection IP54
• Can be 360 degree visibility
• Can be easy to separate assembly
OPERATION
When installing and connecting the circuit as shown in the figure, and when the switch is ON, according to the color position of the TL40, the lamp of the position lights up according to the desired function to remind the operator of the status of the machine such as
Green means machine is working.
Yellow means machine operator notice
Red means the machine stops working or else
There is also a buzzer that alerts the operator if the operator is far from the machine at 90 dB max (at 1 M) or sending a computer alert via RS-485
SPECIFICATION
TL40: Đèn tháp tín hiệu kích thước 40mm/ TL40 Signal Tower Light Dimension 40 mm.
DIMENSION
TL40: Đèn tháp tín hiệu kích thước 40mm/ TL40 Signal Tower Light Dimension 40 mm.
CIRCUIT DIAGRAM
TL40: Đèn tháp tín hiệu kích thước 40mm/ TL40 Signal Tower Light Dimension 40 mm.
ORDER CODE
TL40: Đèn tháp tín hiệu kích thước 40mm/ TL40 Signal Tower Light Dimension 40 mm.
Ứng dụng :
Ứng dụng :
Features Digital Load Cell Indicator Brand PM
• Weight signal transducer. Or voltage from Load Cell (Strain-Gauge) to be a standard digital analog signal with a display for easy operation • Receive input
from Strain-Gauge 1.5, 2, 2.5, 3, 3.3 mV/V by Excite Voltage 5V or 10V
• Standard analog signal output
– Voltage : 0-10 VDC
– Current : 4-20 mA
• Input and output Independent from each other (Isolation).
• Input and output. Can adjust the power supply via High-Low Limit via Push Button, allowing to set Range to convert signal as needed
• Able to program signal Output to work in either Direct or lnverse
• Digital 7-Segment display screen 1 row, 6 digits, which can display signals on the Input and Output sides.
• Peak Hold Function showing maximum value and Tare Zero
• Digital Input for operation (contact type)
• DIN Rail Mounting
• 3 Alarm Relay Output 4 Alarm Function
• 4 decimal places
• Sensor correction -199999 to 999999 to adjust Input
• Can contact Computer by RS485 MODBUS RTU Protoco
Datasheet (2)
Manual (1)
https://youtu.be/r_It1D9sOpw
CÔNG TY TNHH KỸ THUẬT TỰ ĐỘNG HOÀNG TRANG
Đánh giá
Chưa có đánh giá nào.