CMA-001 Analog Thermostat
DESCRIPTION
• CMA-001/CMA-001-E are is an analog temperature controller inside the cabinet
• Activate ON/OFF fan to cool the electrical cabinet or control cabinet. In case of higher temperature than set pointCMA-001/CMA-001-E will order. Fan ON to cool and saving electricity and extend the life of the fan
• There are two models available: the model with internal temperature probe (CMA-001) and models with external temperature probe (CMA-001-E)
• Easy to use. Easy installation with DIN RAIL
• Hysteresis 1-5 C to adjust the distance between fan opening and closing
SPECIFICATION
CMA-001: Bộ điều chỉnh nhiệt độ tương tự / CMA-001 Analog Thermostat
DIMENSION
CMA-001: Bộ điều chỉnh nhiệt độ tương tự / CMA-001 Analog Thermostat
CIRCUIT DIAGRAM
CMA-001: Bộ điều chỉnh nhiệt độ tương tự / CMA-001 Analog Thermostat
ORDER CODE
CMA-001: Bộ điều chỉnh nhiệt độ tương tự / CMA-001 Analog Thermostat
Datasheet (2)
Manual (2)
CLICK PRODUCT INTRODUCTION VIDEO
Product setting video CLICK
Features Digital Load Cell Indicator Brand PM
• Weight signal transducer. Or voltage from Load Cell (Strain-Gauge) to be a standard digital analog signal with a display for easy operation • Receive input
from Strain-Gauge 1.5, 2, 2.5, 3, 3.3 mV/V by Excite Voltage 5V or 10V
• Standard analog signal output
– Voltage : 0-10 VDC
– Current : 4-20 mA
• Input and output Independent from each other (Isolation).
• Input and output. Can adjust the power supply via High-Low Limit via Push Button, allowing to set Range to convert signal as needed
• Able to program signal Output to work in either Direct or lnverse
• Digital 7-Segment display screen 1 row, 6 digits, which can display signals on the Input and Output sides.
• Peak Hold Function showing maximum value and Tare Zero
• Digital Input for operation (contact type)
• DIN Rail Mounting
• 3 Alarm Relay Output 4 Alarm Function
• 4 decimal places
• Sensor correction -199999 to 999999 to adjust Input
• Can contact Computer by RS485 MODBUS RTU Protoco
Datasheet (2)
Manual (1)
https://youtu.be/r_It1D9sOpw
Description
Operation
Digital timer can set the timer by 8 Function( see Function Graph).
Digital timer can set timer in mSec, Sec, Min and Hour from Keypad. And PT-03N
has switch to control Time Start (connect terminal 12 and 14) and the user can
set time value by press reset button in the front or connect with external control
switch (by connect to terminal 12 and 13)
Cảm biến nhiệt độ TSP-08/ Temperature Sensor TSP-08[/caption]
CÔNG TY TNHH KỸ THUẬT TỰ ĐỘNG HOÀNG TRANG
Đánh giá
Chưa có đánh giá nào.