TL80: Đèn tháp tín hiệu 80mm / Signal Tower Light Dimension 80 mm
TL80: Đèn tháp tín hiệu 80mm / Signal Tower Light Dimension 80 mm
DESCRIPTION
• Display status of the machine equipment
• Size 80 mm., Available in both AC and DC
• Can display status up to 5 layers, 5 colors
• Red, Yellow, Green, Blue, White
• Display with LED, prolonging the service life
• There are both continuous and flashing patterns in the same body.
• Buzzer alert at loudness 90 dB Max (at 1 M.)
• Push/ Pull Connection can be used for both NPN / PNP, Open Collector
• RS-485 MODBUS RTU Protocol Communication
(TL80-20M, TL80-2BM, TL80-30M and TL80-3BM models only)
• Anti-rust protection material IP 54
• Can be seen clearly 360 degree
• Can be easily assembled
SPECIFICATION
TL80: Đèn tháp tín hiệu 80mm / Signal Tower Light Dimension 80 mm
DIMENSION
TL80: Đèn tháp tín hiệu 80mm / Signal Tower Light Dimension 80 mm
CIRCUIT DIAGRAM
TL80: Đèn tháp tín hiệu 80mm / Signal Tower Light Dimension 80 mm
ORDER CODE
TL80: Đèn tháp tín hiệu 80mm / Signal Tower Light Dimension 80 mm
Description
Operation
Digital timer can set the timer by 8 Function( see Function Graph).
Digital timer can set timer in mSec, Sec, Min and Hour from Keypad. And PT-03N
has switch to control Time Start (connect terminal 12 and 14) and the user can
set time value by press reset button in the front or connect with external control
switch (by connect to terminal 12 and 13)
Features Digital Load Cell Indicator Brand PM
• Weight signal transducer. Or voltage from Load Cell (Strain-Gauge) to be a standard digital analog signal with a display for easy operation • Receive input
from Strain-Gauge 1.5, 2, 2.5, 3, 3.3 mV/V by Excite Voltage 5V or 10V
• Standard analog signal output
– Voltage : 0-10 VDC
– Current : 4-20 mA
• Input and output Independent from each other (Isolation).
• Input and output. Can adjust the power supply via High-Low Limit via Push Button, allowing to set Range to convert signal as needed
• Able to program signal Output to work in either Direct or lnverse
• Digital 7-Segment display screen 1 row, 6 digits, which can display signals on the Input and Output sides.
• Peak Hold Function showing maximum value and Tare Zero
• Digital Input for operation (contact type)
• DIN Rail Mounting
• 3 Alarm Relay Output 4 Alarm Function
• 4 decimal places
• Sensor correction -199999 to 999999 to adjust Input
• Can contact Computer by RS485 MODBUS RTU Protoco
Datasheet (2)
Manual (1)
https://youtu.be/r_It1D9sOpw
CÔNG TY TNHH KỸ THUẬT TỰ ĐỘNG HOÀNG TRANG
Đánh giá
Chưa có đánh giá nào.